热线电话

400-8368-108

Brief introduction of mold and fixture processing
Using the technology of five-axis CNC machining center to process molds can reduce the quantity of fixtures used. In addtion, the tool costs will be decreased because the five-axis linkage machine tool can save many special tools in processing. The five-axis linkage machine tool can increase the effective cutting edge length of the tool during processing,

reduce the cutting force, increase the life of tools, and reduce the cost.   Using five-axis linkage machine tool to process the mold can quickly complete the mold processing with fast delivery and good quality, also make the mold processing and modification much easier. In the traditional mold processing, the vertical machining center is generally used to complete the milling of workpiece. With the continuous development of mold manufacturing technology, some weakness of vertical machining center itself becomes more and more abvious. Modern mold processing generally uses the ball-end milling cutters, which brings in abvious benefits in the mold processing. But if the vertical machining center is used, the linear speed of bottom surface is zero, then the smooth of bottom surface will be very poor. However, if you use the processing technology of four or five axis linkage machine tool, the above defects will be avoided.



Mold and fixture processing site
Display of mold and fixture product

About Us

Zanty mainly designs and manufactures two categories of solenoids and solenoid valves including frame push-pull solenoid, holding solenoid, tube push-pull solenoid, high-frequency pulse solenoid, resersing rotary solenoid, air solenoid valve, intelligent liquid solenoid valve, proportional valve for respirator medical use and so on. Zanty was honoured as the high-tech enterprise, and was patened for 30 types solenoids nationally and internationally, with the research & development center, CNC five-axis machining center, CNC machining center, hardware stamping center, mold fixture processing center, injection molding center, coil winding center, surface plating processing center and assembly center.


Contact Us

Add:  B4-403 of Bldg 1#,Lianchuang Tech Park, No.21 Bulan Road, Nanwan Community, Longgang District, Shenzhen.

Tel.    : 0755 - 28543752     137-1408-9194

Email:sales@zanty.com

Links
Navigation